Snow plow programme · ATV and UTV
Everything
but the winch.
The blades, the push tubes and lift arms that carry them, the hydraulics that angle them, the wear parts that are meant to be consumed, and the 87 mount plates that put the system on a machine. Every article is a part in its own right. No article includes a winch.
It is a winch-driven system.
Every plow here is raised and lowered by a winch, and no winch is included with any article. A 2 500 to 4 500 lb winch is sufficient. The pulley fairlead kit has to match the spool bolt pattern of the winch already on the machine: ask which winch it is before the order goes in, not after.
1 · Blades
unsnow
the yard.
Two families. The straight blade is the working default. The HD Pro is heavier through the mouldboard and the ribs, and it is the one to put in front of a machine that clears the same yard every week for ten years.
Blade and mount plate are ordered separately. The blade decides the width, the plate decides the machine, and the push tube connects the two.
Powder coat is black as standard. Other finishes are available from the factory on request; the yellow shown is an example, not a stocked article.
| Article | Part | Width | Metric |
|---|---|---|---|
| HP-BL-001-BK | 50" straight ATV plow blade, black | 50" | |
| HP-BL-002-ST | HD straight plow blade, 66" | 66" | |
| HP-BL-003-PU | HD plow blade with polyurethane wear bar, 66" | 66" | |
| HP-BL-004-BK | HD PRO 66" plow blade | 66" | |
| HP-BL-005-BK | HD PRO 72" plow blade | 72" | |
| HP-BL-006-ST | HD 60" straight plow blade | 60" | |
| HP-BL-007-ST | UTV plow blade box ends | 60" | |
| HP-BL-010-ST | ATV/UTV Angeled Plow bladeIn development | 60-66" |
2 · Push tubes
What carries
the blade.
The push tube carries the blade and sets its angle. ATV and UTV tubes are not interchangeable, and the extended UTV tube exists for machines with a longer front overhang.
The hydraulics angle the blade. They do not lift it.
The winch raises and lowers the blade on every machine, with or without the hydraulic system fitted. The hydraulics turn the blade left and right from a dash switch, so the angle is set without leaving the seat. Worth specifying where the plow is angled often: a yard with corners, a lot, a drive with turnarounds.
The hydraulic system is listed for UTV installations and fits the standard and Pro UTV push tubes.
| Article | Part |
|---|---|
| HP-PT-001-ST | ATV push tubes |
| HP-PT-002-ST | UTV lift arm |
| HP-PT-003-ST | UTV push tubes 2" lift kit |
| HP-PT-004-ST | UTV push tubes 4" lift kit |
| HP-PT-005-ST | UTV extended push tubes |
| Article | Hydraulic blade angling |
|---|---|
| HP-LF-001-ST | Hydraulic blade angling for UTV plow, with dash switch |
3 · Wear parts
Meant to be
consumed.
Steel wear bars are reversible and last a season on gravel. Polyurethane is quieter, does not spark and does not mark a paved surface. Rubber flaps stop the blade throwing snow over the top of itself.
Variant codes carry the material: ST is steel, PU is polyurethane, BK is black powder coat.
| Article | Wear bar | Width |
|---|---|---|
| HP-WB-001-PU | ATV 50" snow plow polyurethane wear bar | 50" |
| HP-WB-002-ST | Replacement wear bar, 50" standard | 50" |
| HP-WB-003-PU | ATV 60" snow plow polyurethane wear bar | 60" |
| HP-WB-004-ST | Replacement wear bar, 60" standard | 60" |
| HP-WB-005-PU | UTV 66" snow plow polyurethane wear bar | 66" |
| HP-WB-006-ST | Replacement wear bar, 66" Pro | 66" |
| HP-WB-007-ST | Replacement wear bar, 66" standard | 66" |
| HP-WB-008-PU | UTV 72" snow plow polyurethane wear bar | 72" |
| HP-WB-009-ST | Replacement wear bar, 72" Pro | 72" |
| HP-WB-010-ST | Replacement wear bar, 72" standard | 72" |
| Article | Rubber flap | Width |
|---|---|---|
| HP-RF-001-ST | Rubber flap, 50" plow | 50" |
| HP-RF-002-ST | Rubber flap kit, snow plow blade, 50" | 50" |
| HP-RF-003-ST | Rubber flap, 60" plow | 60" |
| HP-RF-004-ST | Rubber flap kit, snow plow blade, 60" | 60" |
| HP-RF-005-ST | Rubber flap, 66" plow | 66" |
| HP-RF-006-ST | Rubber flap kit, snow plow blade, 66" | 66" |
| HP-RF-007-ST | Rubber flap, 72" plow | 72" |
| HP-RF-008-ST | Rubber flap kit, snow plow blade, 72" | 72" |
4 · Accessories
Ask first,
then order.
Five small articles. Two of them, the pulley fairlead kits, depend on the winch that is already on the machine, and that question is cheaper to ask than to answer with a return.
| Article | Part |
|---|---|
| HP-PA-002-ST | UTV snow plow joystick |
| HP-PA-003-ST | Plow pulley fairlead kit, standard spool |
| HP-PA-004-ST | Plow pulley fairlead kit, wide spool |
| HP-PA-005-ST | UTV snow plow marker flags |
| HP-PA-006-AT | Quick release pins, ATV/UTV, pair |
The pulley fairlead kits come in two
A plow lifted by a winch needs a pulley in front of the fairlead so the line pulls upward rather than forward. The kit bolts to the winch, and spools come in two bolt patterns that are not interchangeable.
| Spool | Metric | Imperial |
|---|---|---|
| Standard | 76 × 123.83 mm | 3" × 4 7/8" |
| Wide | 76 × 169.42 mm | 3" × 6 2/3" |
The joystick belongs with the hydraulic system, not with a winch installation. Quick release pins that attach the push tube to the plate are sold separately.
5 · Mount plates
87 plates.
One machine each.
Each plate is cut for one machine and bolts to the frame rather than the bumper. Hardware and instructions are included. The plate stays on the machine when the plow comes off.
Article numbers stay.
The HP- article numbers stay exactly as issued, so no distributor system needs updating. Specifications are taken from published manufacturer data and are subject to change. Prices, packaging data, lead times and terms are in the dealer price list.